The Phottix Mitros+ TTL Transceiver Flash is the best of Phottix’s gold-standard products all-in-one. A flash with Phottix Odin Transmitter and Receiver, and Strato receiver all built in.
The Phottix Mitros+ TTL Transceiver Flash is the best of Phottix’s gold-standard products all-in-one.
What’s the + ?
+ Built-in Odin Transmitter
+ Built-in Odin Receiver
+ Built-in Strato Receiver
+ Memory Functions
The Phottix Mitros is a powerful and durable hot shoe flash that has proven popular since it’s release earlier this year. The Phottix Mitros+ adds significant functionality, allowing photographers to not only use the Mitros on or off camera for lighting, but to also control and trigger remote flash by radio signal. The Mitros+ is an industry landmark and was developed with input from wedding and event photographers.
Use the Mitros+ on-camera as a key or fill light, as well as control and trigger other Mitros+ flashes or compatible flashes using Phottix Odin Receivers. The Mitros+ also offers a built-in Phottix Odin Receiver and Strato II Receiver. Existing Phottix triggers, like the Phottix Odin or Strato II can be used to trigger the Mitros+ without extra receivers.
With the Phottix Odin’s functionality built-in the Mitros+ can be used to trigger Phottix Odin and Strato Receivers. Likewise: you can also trigger the Mitros+ using a Phottix Odin TCU or Strato II Multi Transmitter.
Using the Mitros+ in Odin Transmitter Mode provides the same functions found on the Phottix Odin, including:
The Mitros+ will control and trigger other Mitros+ flashes in receiver mode or Phottix Odin Receivers.
Like the Phottix Odin, the Mitros+ with a backlit LCD, is intuitive, and easy to use and understand.
The Mitros+ has a built-in Strato II Multi-compatible receiver. Existing Strato II Multi transmitter can trigger the Mitros+. The Mitros+ can also trigger Strato II Multi and Strato I Receivers when set in Odin Transmit Mode.
New with the Mitros+, built-in three location memory save and retrieval functions. Flash set up and custom function information can be saved in the Mitros+’s memory and be quickly recalled when needed. Use the Mitros+ in different modes for different situations? Quickly recall saved set-ups for fast use.
|Power||Four size-AA alkaline or Ni-MH batteries, compatible external battery pack.|
|Modes||E-TTL and E-TTL II, Manual, and Multi Stroboscopic|
|Zoom||Auto and Manual Adjustments|
|Guide No||58/190 (at 105mm focal length, ISO 100 in meters/feet)|
|Flash coverage||24-105mm (14mm with wide angle diffuser panel)|
|Rotation||180 degrees both directions, Up-Down: -7 to 90 degrees.|
|FEC (Flash exposure compensation)||Manual|
|FEB (Flash exposure bracketing)||±3 stops in 1/3 stop increments (Manual flash exposure compensation and FEB can be combined)|
|Sync modes||First Curtain Sync, Second Curtain Sync, and High Speed Sync|
|Stroboscopic flash||Frequency:1-199Hz Number of flashes: 1-100|
|Flash exposure confirmation||Blue LED lamp lights up in E-TTL mode|
|Recycling time/Flash-ready indicator||Normal flash: Approx.0.1-5 sec./Red LED indicator lamp lights up.
Quick flash: Approx.0.1-2.5 sec./Green LED indicator lamp lights up.
|Power saving||Non-wireless slave modes: 90 seconds, Wireless slave mode: (programmable) 10 minutes or 60 minutes|
|Transmission method||Radio Frequency and Optical pulse|
|Wireless options:||Odin Tx, Odin Rx, Strato II Rx, OP Tx (Master), OP Rx (Slave), OP Slave, OFF|
|Transmission range (Approx.)||Radio: 100m +, Optical: Indoors: 12-16m/39.3-52.4 ft., Outdoors: 7-9m/22.9-29.5 ft.|
|Reception angle||Radio: 360 ° all directions, Optical transmission:±40°(horizontal)，±30°(vertical)|
|Controlled groups||3 (A, B, and C)|
|Flash ratio control||1:8-1:1-8:1|
|Standby current||≤100uA in sleep mode|
|Dimensions||(L x W x H): 202.8×77.5×58.3 mm|
|Weight||427g (flash only, excluding batteries)|